Name: SCRATCH & DENT: INEOS Grenadier: LED Side Flood Light – Roof Bar Mount & DTP Plug-In – 1-Pack
Brand: DVA Mechanics
SKU: I-LB-1F-SD
Price: 119.0 USD
Availability: InStock

$139.00 $119.00

Free U.S. Shipping.

Low stock - 1 item left
Backordered, shipping soon

Scratch & Dent: INEOS Grenadier: LED Side Flood Light — 1-Pack

Scratch & Dent clearance item. Standard product photos are used for reference and may not show this unit's specific cosmetic marks. Contact DVA Mechanics for unit-specific condition details before ordering.

Roof Bar Mount · DTP Plug-In · Wide Flood Beam · 1-Light Kit

30 W

Per light

2,400 lm

Per light

IP68

Waterproof & dustproof

EXT3

Recommended DTP port

Wide-area flood illumination for camp, work, and recovery — using the Grenadier's factory roof bar and power system. The DVA LED Side Flood Light delivers 2,400 lumens of broad flood output per unit, pre-fitted with a DTP connector for direct plug-in to EXT3. No wiring runs, no drilling, no modifications to the vehicle.

2,400 lm · Wide flood beam

DTP plug-in · EXT3 rooftop port

No drilling · Factory roof bar clamp

IP68-rated · Aluminum with cooling fins

1 light · Single-light clearance kit

Flood Light vs Side Light — Which Do You Need?

This Product

LED Side Flood Light

Wide flood beam — broad, even area coverage. Best for camp setup, recovery operations, work zones, and site lighting where coverage close to the vehicle matters more than throw distance.

Alternative

LED Side Light

Focused spot/wide beam — directional trail illumination optimised for visibility at range. Includes snap-on yellow lens for fog and dust. Same DTP plug-in and roof bar mount.

Engineered for the Grenadier

DTP Plug-InPre-fitted connector plugs directly into EXT3. No relay, no wiring runs.
Roof Bar MountPrecision-machined clamp. Driver or passenger side. No drilling. Hardware included.
30W / 2,400 lmBroad flood beam. Aluminum housing with cooling fins. IP68 rated.

Installation

Clamp mounting bracket to factory Grenadier roof bar — driver or passenger side
No drilling, cutting, or modification to the vehicle
Plug pre-installed DTP connector into EXT3 rooftop port
All hardware and hex keys included — no additional tools required

What's Included — 1-Light Kit

1-Pack

One flood light — driver-side or passenger-side roof bar position.

1 × 30W LED Flood Light (2,400 lm)
Grenadier roof bar clamp + bracket
Stainless hardware + hex keys
Pre-installed DTP connector

This listing is the 1-Pack only. A second light and DTP splitter are not included.

Specifications

Specification	Details
Vehicle	INEOS Grenadier (all trims)
Beam Pattern	Wide flood
Power per Light	30W
Lumens per Light	2,400 lm
IP Rating	IP68 — waterproof and dustproof
Housing	Aluminum with cooling fins
Connector	Deutsch DTP (pre-installed)
Recommended Port	EXT3 — 3 access points: above left front door, left rear door, and right rear door
Mounting	Factory roof bar clamp — no drilling
Kit	1-Light Kit

Frequently Asked Questions

Is this the 1-Light or 2-Light Kit?

This Scratch & Dent listing is the 1-Light Kit only. It includes one flood light, a Grenadier roof bar clamp and bracket, stainless hardware and hex keys, and a pre-installed DTP connector. Choose it if you only need one side, or want independent control of each side using separate EXT ports. The standard product also offers a 2-Light Kit; that kit is not included in this listing.

Which EXT port should I use?

EXT3 is recommended. It has three access points — above the left front door, above the left rear door, and above the right rear door — making it the most practical port for roof bar-mounted accessories on either side of the vehicle.

Does this require any wiring or drilling?

No. The DTP connector plugs directly into the Grenadier's factory EXT3 rooftop power port. The mount clamps to the factory roof bar. No new wiring runs, no drilling, no modifications to the vehicle.

What is the difference between the Flood Light and the Side Light?

The Flood Light uses a wide flood beam pattern — broad, even coverage suited to camp setup, recovery operations, and work zones close to the vehicle. The Side Light uses a spot/wide beam optimised for directional trail illumination at range, and includes a snap-on yellow lens for fog and dust conditions. Both share the same DTP plug-in and roof bar mounting system.

Does this fit all Grenadier trims?

Yes. Compatible with all INEOS Grenadier trims. The mount is precision-machined for the Grenadier's factory roof bar profile.

Why DVA Mechanics

Purpose-built for the Grenadier. Engineered for real-world off-road use.

Mount, plug in, drive. No universal adapters, no compromise — clean factory integration designed by owners who run the same gear.

Build Out Your Lighting System

Directional Beam

LED Side Light

Same DTP roof bar mount, spot/wide beam for trail use at range. Includes snap-on yellow lens. Single or Dual kit with DTP splitter.

View Product → Overhead Lighting

LED Roof Light Bar

Forward roofline lighting. Pair with flood side lights for full 270° coverage — all using the Grenadier's native DTP connectors throughout.

View Product → Forward Lighting

Front Bumper 3-Light Bar

Add a forward bumper-lighting option. The matching DVA bumper mount is sold separately.

View Product →

SCRATCH & DENT: INEOS Grenadier: LED Side Flood Light – Roof Bar Mount & DTP Plug-In – 1-Pack