INEOS Grenadier: Front Bumper 32" LED Light Bar
Yellow Light
Low-profile output · Factory-clean integration · Osram Chip · Single-Row
ℹ️ Requires: DVA Front Bumper Light Mount (sold separately). No cutting or drilling required.
8,800 lm
Raw Lumens
90 W
Power Draw
32"
813 mm span
IP67
Weather Rating
8,800 lumens of controlled forward illumination mounted to the DVA Front Bumper Light Mount. Sized for the Grenadier's front bumper opening. Osram chip. Deutsch DTP. Not adapted from a generic SKU.
True bolt-on · No cutting
Deutsch DTP · Weatherproof
Osram chip · Not generic
~60 min install
Why Single-Row
Minimal Frontal Height
Single-row keeps the bar's forward profile compact. Mounted to the DVA Front Bumper Light Mount, it presents a clean, intentional face from the Grenadier's bumper opening.
Individual Reflector Optics
Each LED has its own reflector — focused throw, controlled spill. Combo beam covers both distance and proximity without washing out the road shoulder.
OEM-Finished Look
Mounts to the DVA Front Bumper Light Mount for a factory-finished result day and night. Spans the full bumper opening width for a purposeful, symmetrical appearance.
True Bolt-On Installation
No cutting. No drilling. No permanent modification. Wiring routes through existing chassis pathways and connects to EXT1 or EXT5 under-hood auxiliary connectors — the same connectors INEOS engineered for accessories.
Both harnesses included: one for direct factory auxiliary connection, one for aftermarket controller integration. Estimated install time 60 minutes.
- Mounts to DVA Front Bumper Light Mount (sold separately)
- No cutting, drilling, or permanent modification
- Wiring routes through existing chassis pathways
- Deutsch DTP connector — weatherproof, field-serviceable
- Compatible with EXT1 or EXT5 under-hood connectors
- Compatible with centralized lighting controllers
- Estimated install time: 60 minutes
What's Included
- 32" single-row LED light bar
- Wiring harness — factory EXT1/EXT5 auxiliary connection
- Wiring harness — aftermarket controller integration
- Mounting hardware
Key Features
- Deutsch DTP Throughout: Field-serviceable, vibration-resistant, IP67-rated. The same connector standard used in commercial vehicle wiring — not a proprietary fitting you can't source.
- Single-row LED configuration for minimal frontal profile
- Individual reflector optics for controlled beam pattern
- Osram chip technology — not generic components
- Aluminum housing construction
- Combo beam pattern (Spot + Flood)
Technical Specifications
| Specification | Details |
|---|---|
| Vehicle | INEOS Grenadier (2023–current) |
| Length | 32" / 813 mm |
| LED Configuration | Single-row |
| LED Type | Osram Chip |
| Raw Lumens | 8,800 lm |
| Wattage | 90 W |
| Beam Pattern | Combo (Spot + Flood) |
| Operating Voltage | 12 V |
| Current Draw | 7.5 A |
| IP Rating | IP67 |
| Housing Material | Aluminum |
| Connector | Deutsch DTP |
| Mounting | DVA Front Bumper Light Mount (sold separately) |
Frequently Asked Questions
Do I need the DVA Front Bumper Light Mount?
Yes. This light bar mounts via the DVA Front Bumper Light Mount, sold separately. The mount provides the bracket system that integrates the bar into the Grenadier's factory bumper opening.
Do I need to drill or modify my vehicle?
No. True bolt-on installation — no cutting, drilling, or permanent modification required.
Why single-row instead of dual-row?
Single-row keeps the frontal profile minimal. Mounted to the DVA Front Bumper Light Mount, it presents cleanly from the bumper opening without the visual bulk of a dual-row bar. Individual reflector optics maintain beam control and throw distance without brute-force output.
Can I wire this without a lighting controller?
Yes. Both harnesses are included. One connects directly to the Grenadier's factory EXT1 or EXT5 under-hood auxiliary connector. The other supports integration with an aftermarket centralized lighting controller.
How does this compare to the DVA 3-Light LED Bar Kit?
The 3-Light Kit uses three individual LED pods. This 32" bar is a single continuous unit spanning the full bumper opening — different beam spread, different visual profile. Both mount to the DVA Front Bumper Light Mount.
Why DVA Mechanics
Engineered for the Grenadier — not adapted from something else
Every DVA product is designed, tested, and validated on the vehicle it's built for. By owners, for owners.
Complete the System
RequiredMounting System
DVA Front Bumper Light Mount
The bracket system that integrates this light bar into the Grenadier's factory bumper opening. No cutting, no welding. Sold separately.
View Product →Alternative Configuration3-Light LED Bar Kit
Mount + three individual Cree LED pods (~13,200 lm, ~110W combined). Kit includes the mount — different beam spread and visual profile.
View Product →Roof LightingLED Roof Light Bar
Seamless roofline integration. Pair with the bumper bar for full front and overhead coverage — both using the Grenadier's native DTP connectors.
View Product →
