Installing Your DVA Mechanics Hi-Lift Jack Mounting System
Thank You for Choosing the DVA Mechanics Hi-Lift Jack Mounting System for the Ineos Grenadier!
The installation process is quick and straightforward. Your kit includes:
- (3) 3” Lower Clamps
- (3) Universal Upper Clamps
- (3) M8 Mounting Knobs
- (12) M4 x 10mm Stainless Steel Screws
- (6) Thick Rubber Bushings (for horizontal ladder rails and Ineos Roof Rails; not typically needed for a standard Hi-Lift installation)
- (6) Thin Rubber Bushings (for vertical ladder rails when mounting your Hi-Lift jack)
Recommended Mounting Location
The ideal mounting position is on the left vertical rails of the rear ladder. When choosing this spot, consider:
- Ensuring the base of the Hi-Lift jack clears the top of the rear bumper.
- Ensuring the Hi-Lift jack does not contact the rear taillight when the door is fully open.
Installation Steps
- Insert one Thin Rubber Bushing into the 3” Lower Clamp and one Thin Rubber Bushing into the Universal Upper Clamp. This protects the rail surface while providing a tight, secure attachment.
- Use (4) M4 x 10mm Stainless Steel Screws to secure the Lower Clamp, Upper Clamp, and Thin Rubber Bushings together.
- Attach the first clamp to the ladder:
- In our example, we mounted the first clamp approximately 2” above the top step of the ladder, with the Universal Upper Clamp facing outward.
- Secure the M8 Mounting Knob through the 8th hole from the top of your Hi-Lift jack.
- Once the top clamp is secure, position the remaining two clamps to securely grip your Hi-Lift jack.
Key Considerations
- Ensure the Hi-Lift does not contact the rear bumper or the rear taillight when the door is fully open.
- Placement may vary depending on the Hi-Lift model you’re using.
If you have any questions or need assistance, contact us at dvamechanics@gmail.com.
